|
|
|
FLEXOID:
|
|
•COMPOSITION
Plasticised gelatine impregnated material, cellulose based.
•CHARACTERISTICS
Excellent oil and fuel resistance.
Seals better at lower cost.
Available in roll or sheet form over a wide range of thicknesses.
• LIMITATIONS
Stored gaskets must be protected from wide changes of humidity
and temperature to prevent dimensional change.
Not suitable for alkalis, acids and steam.
Maximum recommended service temperature: 120°C.
• USES
Prime market: automotive.
Limited uses in industrial markets because of relatively low
heat and chemical resistance compared with non-asbestos materials.
Because of its ability to seal against petrol, oil and water
at low cost, Flexoid is used extensively by leading British,
European and US automotive manufacturers.
Flexoid has a major market share in the big four of the European
Economic Community, i.e. U.K., Germany, France and Italy.
|
|
|
|
|
|
Please click on PSG on the menu bar for further information
|
|
PSG Group Ltd. - Disclaimer
All technical information and related data supplied by or on behalf of
PSG
Group Ltd. (and subsidiary companies) is believed to be accurate and
complete. However, it will remain the responsibility of the purchaser
/ user
to determine the suitability of each product for a particular application
and shall assume all risk and liability in connection therewith.
No warranty is implied with regard to information or recommendations
given
by our distributors and or subcontractors.
The descriptions of products and services displayed on this web site
and the
terms under which they are given may be modified at any time without
notice.
In any event or occurrence, our liability is strictly limited to the
value
of the original invoice.
Any links on this site are for the convenience of the visitor only and
we
are not responsible for their content.
|
|
|