|
|
|
|
|
|
HEAT STABILISED FILMS
|
|
Heat stabilised Polyester or biaxially orientated polyethylene
terephthalate (PET) film, is used in a multitude of applications
and markets due to their enhanced chemical resistance and
a number of
other critical attributes. Some of the uses include:
•Membrane Touch Switches
- graphics, circuitry and spacer layers.
•PSA and labels.
Speciality Laminates.
•Metallising and sputter coating.
•Bar Codes.
•Electrical and Insulation.
•Abrasives.
Heat stabilised polyester films are available in a variety
of gauges and in different types from super clear to hazy
and from translucent
to opaque white. Heat stabilised films are also available
with a number of pre-treatments to enhance adhesion of
inks and
coatings, to promote easier handling or restrict shrinkage
through processing.
•Heat Stabilised Melinex® Film Guide
•Application Circuitry
Grade ST507
Description Hazy, good handling
Thickness 75 micron
100 micron
125 micron
•Application Graphics & Circuitry
Grade ST506
Description Clear, double sided adhesion pre-treatment
Thickness 125 micron
175 micron
• Application Speciality Labels
Grade ST535
Description White, double sided adhesion pre-treatment
Thickness 125 micron
•Application Graphics & Coating
Grade ST725
Description Clear, double sided pre-treatment for exceptional
adhesion
Thickness 125 micron
175 micron
250 micron
•Application Circuits & DialectricsGrade ST726
Description Clear, double sided pre-treatment for exceptional
circuit adhesion.
Thickness 125 micron
175 micron
|
|
|
|
|
|
We offer the following base films Heat stabilised film applications:
|
Polyester Converters
(PET) Polyester Films |
|
PSG Group Ltd. - Disclaimer
All technical information and related data supplied by or on behalf of PSG
Group Ltd. (and subsidiary companies) is believed to be accurate and
complete. However, it will remain the responsibility of the purchaser / user
to determine the suitability of each product for a particular application
and shall assume all risk and liability in connection therewith.
No warranty is implied with regard to information or recommendations given
by our distributors and or subcontractors.
The descriptions of products and services displayed on this web site and
the
terms under which they are given may be modified at any time without notice.
In any event or occurrence, our liability is strictly limited to the value
of the original invoice.
Any links on this site are for the convenience of the visitor only and we
are not responsible for their content.
|
Melinex® and Mylar® are registered trademarks of DuPont
Teijin Films.
|
|