|
|
| |
|
Printing Instructions |
|
PSG Group
|
Polymex® BW122/CW
|
Polylacticacid (PLA)
|
|
 |
| |
|
|
Description
|
Polymex® BW122/CW is a clear PLA film that is primed on two side to promote adhesion. It combines high strength and durability, clarity and excellent chemical resistance.
|
Applications
|
Polymex® BW122/CW is designed for markets requiring clarity, brilliance and adherability. Polymex® BW122/CW is used in window box applications. |
Pre-treatment
|
Primed on two sides to promote adhesion.
|
Approvals
|
Polymex®BPW122/CW complies with FDA regulation. |
|
|
The Polymex® BW122/CW property values below are typical measurements. Further guidance on series selection, functional behavior by end use, film processing, standard roll configuration and gauges is available through our sales department.
|
|
|
|
|
 |
Property |
BW122 |
Unit |
Test Method |
|
Nominal Thinckess |
20 |
25 |
30 |
40 |
µ
|
- |
|
Ave. Yield |
40
|
32
|
26.7
|
20 |
m2/kg |
- |
Heat seal range |
80 - 130 |
°C |
- |
Heat seal strength |
> 2
-
|
n/15 mm |
4.42 |
|
Wettability |
> 37
-
|
mN/m |
DIN ISO 8296 |
|
Gloss |
> 100
- |
% |
DIN EN ISO 2813 |
Haze |
< 3
- |
%
|
ASTM D 1003 |
|
WVTR |
|
|
|
|
|
|
|
23°c/85 % rh |
85
|
70
|
55
|
45
|
g/m2*d
|
ASTM F 1249
|
38°c/90 % rh |
175
|
162
|
150
|
120 |
g/m2*d
|
ASTM F 1249
|
OTR: 23°c/50 % rh |
720 |
610 |
500 |
380 |
cm3/m2*d*bar |
DIN 53380-3 |
|
| Other Specifications: |
| Click here to return to Polymex® PET Films |
| Click here to find out more on Window
Patching |
| |
| |
PSG
Group Ltd. - Disclaimer
All technical information and related data supplied by or on behalf
of PSG
Group Ltd. (and subsidiary companies) is believed to be accurate
and
complete. However, it will remain the responsibility of the purchaser
/ user
to determine the suitability of each product for a particular application
and shall assume all risk and liability in connection therewith.
No warranty is implied with regard to information or recommendations
given
by our distributors and or subcontractors.
The descriptions of products and services displayed on this web site
and the
terms under which they are given may be modified at any time without
notice.
In any event or occurrence, our liability is strictly limited to
the value
of the original invoice.
Any links on this site are for the convenience of the visitor only
and we
are not responsible for their content. |
Polymex® is a registered trademark by PSG Group Ltd. |
|
