|
|
| |
|
Printing Instructions |
|
PSG Group
|
Polymex® PW122/CW
|
Polyethylene Terephthalate (PET)
|
|
 |
| |
|
|
Description
|
Polymex® PW122/CW is an ultra clear polyester film that is chemically primed on two side to promote adhesion to solvent based inksand coatings. It combines high strength and durability, optical clarity and excellent chemical resistance.
|
Applications
|
Polymex® PW122/CW is designed for markets requiring high clarity, brilliance and solvent adherability. Polymex® PW122/CW is used in window box applications. |
Pre-treatment
|
Chemically primed on two sides to promote adhesion of solvent based inks and coatings.
|
Approvals
|
Polymex® PW122/CW complies with FDA regulation. |
|
|
The Polymex® PW122/CW property values below are typical measurements. Further guidance on series selection, functional behavior by end use, film processing, standard roll configuration and gauges is available through our sales department.
|
|
|
|
|
 |
Property |
Unit of measure |
Typical Value |
Test Method |
|
Area Yield |
in2•mil/lb
m2•mm/kg |
19,800
717
|
ASTM D 4321 |
|
Tensile Strength MD |
psi
kg/CM2 |
31,000
2,180
|
ASTM D 882 |
Yield Strength (F5) MD |
psi
kg/cm2
|
15,500
1,090
|
ASTM D 882 |
Ulitimate Elongation MD |
% |
115 |
ASTM D 882 |
|
Modulas MD |
psi
kg/cm2 |
550,000
38,700
|
ASTM D 882 |
|
Coefficient of Friction (A/B) |
psi
kg/CM2 |
31,000
2,180 |
ASTM D 882 |
Shrinkage
MD
TD
|
% |
2.5 max.
2.5 max.
|
30 min. at 150° C |
|
Density |
g/cm3 |
1.395
|
ASTM D 1505
|
|
Total Haze* |
% |
142 gauge 0.9 max.
200 gauge
1.0 max. |
ASTM D 1003 |
* Values for reference data only.
|
| Other Specifications: |
| Click here to return to Polymex® PET Films |
| Click here to find out more on Window
Patching |
| Click here for FDA approval |
| |
PSG
Group Ltd. - Disclaimer
All technical information and related data supplied by or on behalf
of PSG
Group Ltd. (and subsidiary companies) is believed to be accurate
and
complete. However, it will remain the responsibility of the purchaser
/ user
to determine the suitability of each product for a particular application
and shall assume all risk and liability in connection therewith.
No warranty is implied with regard to information or recommendations
given
by our distributors and or subcontractors.
The descriptions of products and services displayed on this web site
and the
terms under which they are given may be modified at any time without
notice.
In any event or occurrence, our liability is strictly limited to
the value
of the original invoice.
Any links on this site are for the convenience of the visitor only
and we
are not responsible for their content. |
Polymex® is a registered trademark by PSG Group Ltd. |
|
